every color of the rainbow …
Painting aluminum Venetian blinds can be fun and satisfying, especially when you take a step back, and look at what & # 39; I did. You could add a little sun, some of the colors of the rainbow and the vastness of the sea and the sky is simply changing the color of the aluminum Venetians a few easy steps. If you choose this type of window treatment is likely to be driven by the durability and ease of maintenance. However, as is usually the case, people tend to get bored looking at the same scene over and over again in the window. It is probably the right time to start a remodeling project that includes the repainting of aluminum venetian blind, which is a more affordable option to buying new ones. As you are probably looking for a budget option, we hereby offer some tips for painting aluminum blinds a few easy steps.
If you have decided to paint the metal venetian blinds, this is what you should do.
1. The first thing you need to do is remove the blinds. Do not worry, it's not as difficult as it might seem at first. Simply use a screwdriver to remove the end cap from the bottom of the blind. Then, untie the string connecting the blind and remove the slats. If you have previously installed the Venetians, this should be a piece of cake for you. On the other hand, if everything looks the complex or simply not as cunning, follow the manufacturer's instructions that came with the acquisition of the blind, or finally ask someone to help you.
2. The next step is to clean the blinds. The aluminum to be cleaned Venetians correctly and that all dust, debris and other contaminants properly removed because the paint should be used only in a clean and smooth surface, otherwise the painting work is hampered, and you may face some inconsistencies. Cleaning aluminum shutters are very simple. A thorough cleaning, you can soak them in water (bath, for example), wash using a mild soap or detergent and rinse shower. You could also use a cloth or sponge and a bucket of cold water. Simply add some soap to the cloth and apply it to every bar and rinse with another clean, damp cloth. This is it. Please note that the blinds must be completely dry before you paint, so a dry towel to collect the remaining water, or better yet leave it to dry out.
3. Now & # 39; and convert the painting of aluminum blinds. This is in addition to the best way to go because the spray paint, which is the standard deviation and damage to surrounding objects. If you decide to paint the inside of the blind, there is always some precautions to protect your floors, walls and furniture properly. Before adding the dye can be added to a bonding primer. Primary metal specifically allows the paint to stick to the metal surface and extend the existing blind spots. The primer each slat blinds and make sure to cover the entire surface of both. The primer will be allowed to dry (approximately one hour) to apply it to the other side of the blind.
4. When the primer is completely dry, you can start painting the aluminum Venetian blinds. A Select spray paint on metal surfaces . It should add several layers of paint that getting the color intensity is likely to want, and prevents the paint pealing off or fade in time. Add two or three coats of paint, each strip and leave it to dry (again optimally for an hour, but it may depend on the paint). Repeat the process on the other side of the blind. When the paint is dry, remove it and attach it to the Venetians. Consider the job done.
Always keep in mind that it is not limited by a color blind. It may mix colors to paint all bar a few samples of other colors. It's entirely up to you. However, if you think that the painting of the metal Venetians a grueling and tedious task, it is still true that there are some colorful new aluminum shutters the full range of colors.